Jan 04, 2013 Installation of Aprilaire 700 humidifer with automatic control Part 1. Look for PART 2 of this install on my youtube channel Ozzstar. SUBSCRIBE: www. READ COMPLETE SAFETY INSTRUCTIONS AND INSTALLATION TEMPLATE BEFORE STARTING INSTALLATION MODEL 700 SERIES HUMIDIFIER RESEARCH PRODUCTS CORPORATION • P.O. BOX 1467 • MADISON, WI • CALL 800/334-6011 • FAX 608/257-4357 INSTALLATION OPTIONS Typical Installation Alternate Installation COOLING COILS IN WARM AIR PLENUM Aprilaire to. Installation of Aprilaire 700 humidifer with automatic control Part 1. Look for PART 2 of this install on my.

DIY Dad giving an overview of the installation of the Aprilaire 700 Automatic whole home humidifier. Here are the parts I purchased for the installation. Search Lowes for these item/product numbers. Wire Terminal Kit: 3364650 18-2 thermostat wire: 70086 (By the foot) 18-8 wire 175730 (by the foot) Copper Tube for Water Supply: 230509 What I already had: Drill- I used a 3/4 inch wood bit to get a hole in my return for the control unit.

It wasn't pretty, but it worked. 3/4 inch drill bit for metal aren't cheap ($20 for a 3/4 inch drill bit) Wire nuts varied by size. Electrical tape. A couple feet of indoor electrical wire. (12 gauge) Wire Cutters Wire Crimpers for Terminal Connections Tin Snips Screw Drivers Foil Tape for sealing duct work.

Choose an Installation Location Choose a location on the for the. Depending on the layout of your duct system, you can also install the humidifier on the return duct.

Select a spot that is easy to reach and large enough to accommodate the humidifier. Avoid installing the unit on a duct with horizontal airflow, as it will impede performance. Cut the Installation Hole Locate the installation template that came with your humidifier. Lay it flat against the air supply plenum, making sure to leave enough room for the drain line. The template position should also allow easy access to the unit for repairs. Use a dark to trace around the template. Place a on the inside of your marker line, about 1 inch from the edge.

Tap on the end of the screwdriver with a hammer to punch a starter hole. Download All Javascript Links In New Tab Firefox. Insert metal cutters into the hole, and cut around your template line. Install the Humidifier Base Pull up the latch at the bottom of the Aprilaire humidifier to separate the cover. Set the cover aside. Slip your hand around the top end of the evaporator assembly, and pull it out of the humidifier. Lift the base of the Apriliare 700, and place the top edge into the top of the hole. Push the base up so the hooks fit around the metal edge.